Your location: HOME > SOLUTION >
Hammer crusher adapt materials: limestone, slag, coke, coal, chalk, gypsum, salt, brick and the like.
Hammer Crusher Application: widely used in metallurgical industry, building materials industry, road building industry, chemical industry and silicate industry, suitable for crushing of medium or above hardness ores and rocks.
    Hammer crusher for crushing all kinds of hard and abrasive weak materials. The compressive strength of the material does not exceed 100MPa, moisture content less than 15%. Material to be broken coal, salt, chalk, gypsum, brick, limestone. Also for crushing fiber structure, strong flexibility and toughness of broken wood, paper or broken asbestos cement waste to recover asbestos fibers and so on. In addition, hammer crusher not only can be used for crushing production line, sand production line, but also can replace the cone crusher in the mineral processing production line.

250th-450th Sedimentary rocks Hammer Crusher in Central in Africa

Hammer crusher main purposes
    Hammer crusher is suitable for cement, chemical, electric power, metallurgy and other industrial sectors crushing medium hardness materials, such as limestone, slag, coke, coal and other materials in the debris, crushing operations.
Hammer crusher working principle
    The main components of hammer crusher rotor with a hammer (also known as hammer) of. Rotor from the spindle, disk, pin and hammer components. The motor drives the rotor rotating at high speed in the crushing cavity. Material from the upper mouth to feed into the machine, hit, impact, shear, abrasive and high-speed movement of the hammer and crushed. In the lower part of the rotor, with sieve, sieve size less than the pulverized material size fractions discharged through the sieve, sieve size larger than coarse sieve retention continue to be on strike and grinding hammer, and finally through the sieve from the plane.
    I produced the hammer crusher is suitable for crushing various brittle materials minerals. Material to be broken coal, salt, white sub, gypsum, alum, brick, tile, limestone. The compressive strength of the material does not exceed 100 MPa, humidity less than 15.
Hammer crusher structure diagram
1-- hammer; 2-- Triangle turntable; 3-- axis; 4-- 5-- bearing housing; 6-- coupling; 7-- adjusting means; 8-- wicker Article
    Hammer crusher housing is made of welded steel plate box structure, divided along the center axis of the upper and lower parts, separated by a bolted above the enclosure has to spout. To avoid the inside walls under the impact of material wear and deformation, inside the enclosure are lined with protection liner.
    Turntable triangle and circle are two, three corners of a triangle dial easy to wear, if that is not timely, easy to hammer out its life as good as circular dial. On the turntable perforated with six mandrels, mandrel are staggered by hammer mounted on a turntable, isolation between the hammer sets isolation. When the rotor rotates at high speed hammer crushed material by centrifugal force.
    Ends bearing on the rotating shaft, bearing respectively mounted on both sides of the cabinet, and is fixed thereto with bolts. Grate rotor shaft centers are arranged in the grate frame, grate frame is bolted to the housing. Lower case is equipped with two eccentric through shaft. Rotation of the handle on both sides of the machine, the eccentric rotation angle, it will be lifted or lowered grate frame, which can adjust the gap between the hammer and the grate, also obtained the required product size. You may not have to stop when adjusting.